These fluid extractors are a reliable and efficient method for removing fluids from most any engine, transmission, differential, transfer case or gearbox. They are extremely easy to operate and maintain and are ideal for use with automobiles, trucks, tractors, farm machinery, marine engines, forklifts, industrial machinery and various other small engines. A shop air supply at approximately 100 PSI @ 15 CFM is all that is required to create a vacuum. All extractors are supplied with a set of 6 flexible probes, 3 adapters (to fit Mercedes, BMW, Citroen and VW), 12’ suction hose and 6’ discharge hose. Units have powder coat finish for durability and long life. Not for use with flammable or explosive fluids.

 

P/N 24224T
Fluid Extractor with 6-gallon tank capacity. This unit is emptied manually by lifting and tipping unit. Has wheels and handle for easy mobility. Dimensions, 13” W x 11” D x 37” H, empty weight 31 pounds.

 

P/N 24270
Fluid Extractor with 21-gallon capacity, has level gauge with metal guard and 6’ discharge hose. Unit is self-evacuating by pressurizing tank with approximately 10 PSI. Dimensions, 18” W x 21” D x 39” H, empty weight 70 pounds.

 

P/N 24271
Fluid Extractor with 21-gallon capacity, supplied with 2 gallon transparent bowl to allow operator to check quantity and quality of oil prior to discharging into tank below. Dimensions, 18” W x 21” D x 56” H, empty weight 85 pounds.

P/N 24272
Combination extractor and oil drain with 21-gallon tank capacity. Waste oil is discharged by pressurizing tank to approximately 10 PSI. Comes complete with a set of 6 flexible probes and 3 adapters. Maximum drain pan extension height is 64”. Dimensions, 18” W x 21” D x 46” H minimum, empty weight 84 pounds.

 

P/N 24273
Combination extractor and oil drain with 2 gallon transparent bowl. Has 21-gallon tank capacity and is supplied complete with a set of 6 flexible probes and 3 adapters. Maximum drain pan extension height is 64”. Dimensions, 18” W x 21” D x 56” H minimum, empty weight 91 pounds.

 

P/N 900212
Replacement suction hose, 3/8” x 12’, wire reinforced.