These hoses are suitable for use with Oil, Hydraulic Fluid, Transmission Fluid
and Antifreeze. Hoses are typically supplied with a rigid fitting on one side
and a swivel fitting on the other side.
Please contact Liquidynamics if you require a special hose type, length or fittings
LOW
PRESSURE AIR AND WATER HOSE
A premium high
quality multi-purpose hose that is an excellent choice for air and water applications.
The hose is constructed with high tensile textile cord reinforcement and a
red neoprene cover. This construction provides excellent kink resistance,
a working pressure of 300 PSI, a 4:1 safety factor and a temperature range
of -20¾ F to +212¾ F.
| MODEL | SIZE | DESCRIPTION |
| 81100-02 | 3/8” x 2’ | 1/4” NPTM Rigid x 1/4” NPTM Swivel fittings |
| 81100-04 | 3/8” x 4’ | 1/4” NPTM Rigid x 1/4” NPTM Swivel fittings |
| 81100-06 | 3/8” x 6’ | 1/4” NPTM Rigid x 1/4” NPTM Swivel fittings |
| 81100-10 | 3/8” x 10’ | 1/4” NPTM Rigid x 1/4” NPTM Swivel fittings |
| 81100-15 | 3/8” x 15’ | 1/4” NPTM Rigid x 1/4” NPTM Swivel fittings |
| 81100-25 | 3/8” x 25’ | 1/4” NPTM Rigid x 1/4” NPTM Swivel fittings |
| 81100-30 | 3/8” x 30’ | 1/4” NPTM Rigid x 1/4” NPTM Swivel fittings |
| 81100-40 | 3/8” x 40’ | 1/4” NPTM Rigid x 1/4” NPTM Swivel fittings |
| 81100-50 | 3/8” x 50’ | 1/4” NPTM Rigid x 1/4” NPTM Swivel fittings |
| 81125-02 | 3/8” x 2’ | 3/8” NPTM Rigid x 3/8” NPTM Swivel fittings |
| 81125-04 | 3/8” x 4’ | 3/8” NPTM Rigid x 3/8” NPTM Swivel fittings |
| 81125-06 | 3/8” x 6’ | 3/8” NPTM Rigid x 3/8” NPTM Swivel fittings |
| 81125-10 | 3/8” x 10’ | 3/8” NPTM Rigid x 3/8” NPTM Swivel fittings |
| 81125-15 | 3/8” x 15’ | 3/8” NPTM Rigid x 3/8” NPTM Swivel fittings |
| 81125-25 | 3/8” x 25’ | 3/8” NPTM Rigid x 3/8” NPTM Swivel fittings |
| 81125-30 | 3/8” x 30’ | 3/8” NPTM Rigid x 3/8” NPTM Swivel fittings |
| 81125-40 | 3/8” x 40’ | 3/8” NPTM Rigid x 3/8” NPTM Swivel fittings |
| 81125-50 | 3/8” x 50’ | 3/8” NPTM Rigid x 3/8” NPTM Swivel fittings |
| 81150-02 | 1/2” x 2’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
| 81150-04 | 1/2” x 4’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
| 81150-06 | 1/2” x 6’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
| 81150-10 | 1/2” x 10’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
| 81150-15 | 1/2” x 15’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
| 81150-25 | 1/2” x 25’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
| 81150-30 | 1/2” x 30’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
| 81150-40 | 1/2” x 40’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
| 81150-50 | 1/2” x 50’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
| 81150-75 | 1/2” x 75’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel fittings |
LOW
PRESSURE OIL HOSE 3/4” & 1” ID
For use with
Double Diaphram Pumps. A good multi-purpose hose for applications requiring
maximum flexibility with good resistance to air, water and oils. Construction
is a type “B” elastomer with high tensile textile cord reinforcement
with an operating temperature range of -40¾ F to +200¾ F. Outside diameter
is 1.15” (3/4”), 1.47” (1”) and has a maximum working
pressure of 250 PSI and a maximum suction of 20” Hg. Minimum bend radius
is 5”.
| MODEL | SIZE | DESCRIPTION |
| 81225-02 | 3/4” x 2’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel |
| 81225-04 | 3/4” x 4’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel |
| 81225-06 | 3/4” x 6’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel |
| 81225-25 | 3/4” x 25’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel |
| 81225-30 | 3/4” x 30’ | 3/4” NPTM Rigid x 1” NPTM Swivel |
| 81225-40 | 3/4” x 40’ | 3/4” NPTM Rigid x 1” NPTM Swivel |
| 81225-50 | 3/4 “x 50’ | 3/4” NPTM Rigid x 1” NPTM Swivel |
| 81230-02 | 1” x 2’ | 1” NPTM Rigid x 1” NPTM Swivel |
| 81230-04 | 1” x 4’ | 1” NPTM Rigid x 1” NPTM Swivel |
| 81230-06 | 1” x 6’ | 1” NPTM Rigid x 1” NPTM Swivel |
| 81230-25 | 1” x 25’ | 1” NPTM Rigid x 1” NPTM Swivel |
| 81230-30 | 1” x 30’ | 1” NPTM Rigid x 1” NPTM Swivel |
| 81230-35 | 1” x 35’ | 1” NPTM Rigid x 1” NPTM Swivel |
| 81230-40 | 1” x 40’ | 1” NPTM Rigid x 1” NPTM Swivel |
| 81230-50 | 1” x 50’ | 1” NPTM Rigid x 1” NPTM Swivel |
MEDIUM
PRESSURE OIL HOSE 1/2” ID
For use with
3:1 and 5:1 Pumps. An excellent general purpose hose used for oil, hydraulic
fluid, transmission fluid and antifreeze. Hose is constructed with a neoprene
tube, high tensile steel wire braid and oil and weather resistant synthetic
rubber. Hose is rated to a maximum working pressure of 2,500 PSI and a minimum
burst of 10,000 PSI and has a temperature range of -40¾ F to +250¾ F. The
hose is SAE/USCG marine listed and exceeds SAE 100R1 specifications. It is
very flexible with a minimum bend radius of 3.0 inches, OD is 0.75”.
Hose may be used for suction or discharge.
| MODEL | SIZE | DESCRIPTION |
| 81200-02 | 1/2” x 2’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-04 | 1/2” x 4’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-05 | 1/2” x 5’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-06 | 1/2” x 6’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-08 | 1/2” x 8’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-12 | 1/2” x 12’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-15 | 1/2” x 15’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-20 | 1/2” x 20’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-25 | 1/2” x 25’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-30 | 1/2” x 30’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-35 | 1/2” x 35’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-40 | 1/2” x 40’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-45 | 1/2” x 45’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-50 | 1/2” x 50’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
| 81200-75 | 1/2” x 75’ | 1/2” NPTM Rigid x 1/2” NPTM Swivel |
MEDIUM
PRESSURE OIL HOSE 3/4” & 1” ID
For use with
5:1 High Volume Pumps. An excellent general purpose hose used for oil, hydraulic
fluid, transmission fluid and antifreeze. Hose is constructed with a neoprene
tube, high tensile steel wire braid and oil and weather resistant synthetic
rubber. Hose is rated to a maximum working pressure of 1,250 PSI and a minimum
burst of 5,000 PSI and has a temperature range of -40¾ F to +250¾ F. The hose
is SAE/USCG marine listed and exceeds SAE 100R1 specifications. It is very
flexible with a minimum bend radius of 4.3” inches, OD is 1.01”.
Hose may be used for suction or discharge.
| MODEL | SIZE | DESCRIPTION |
| 81250-02 | 3/4” x 2’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel Fittings |
| 81250-04 | 3/4” x 4’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel Fittings |
| 81250-06 | 3/4” x 6’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel Fittings |
| 81250-12 | 3/4” x 12’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel Fittings |
| 81250-20 | 3/4” x 20’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel Fittings |
| 81250-25 | 3/4” x 25’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel Fittings |
| 81250-30 | 3/4” x 30’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel Fittings |
| 81250-40 | 3/4” x 40’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel Fittings |
| 81250-50 | 3/4” x 50’ | 3/4” NPTM Rigid x 3/4” NPTM Swivel Fittings |
| 81260-02 | 1” x 2’ | 1” NPTM Rigid x 1” NPTM Swivel Fittings |
| 81260-04 | 1” x 4’ | 1” NPTM Rigid x 1” NPTM Swivel Fittings |
| 81260-06 | 1” x 6’ | 1” NPTM Rigid x 1” NPTM Swivel Fittings |
| 81260-12 | 1” x 12’ | 1” NPTM Rigid x 1” NPTM Swivel Fittings |
| 81260-20 | 1” x 20’ | 1” NPTM Rigid x 1” NPTM Swivel Fittings |
| 81260-25 | 1” x 25’ | 1” NPTM Rigid x 1” NPTM Swivel Fittings |
| 81260-30 | 1” x 30’ | 1” NPTM Rigid x 1” NPTM Swivel Fittings |
| 81260-40 | 1” x 40’ | 1” NPTM Rigid x 1” NPTM Swivel Fittings |
| 81260-50 | 1” x 50’ | 1” NPTM Rigid x 1” NPTM Swivel Fittings |