Return to Main Product Directory

Square Tank


Ideal for locations where floor space is limited and a large capacity is desired. Tank is constructed from 10 gauge carbon steel to prevent “bulging”, supplied with a reel mounting bracket, three 2” bung openings and a 1” drain. Finish is gray laquer.

P/N 901075 336 Gallon capacity; 36”L x 36”W x 60”H (65” overall height). Shipping weight 465 lbs.

 

Oval Tanks:


These tanks are UL 142 listed, constructed of 12 gauge carbon steel with reinforced “strap” legs. Tanks have three 2” bung openings, one 3” emergency vent and a 1” drain. Powder coat finish.

P/N 901060 275 Gallon Oval; 60”L x 27”W x 50”H, shipping weight 328 lbs.
P/N 901061 330 Gallon Oval, 72”L x 27”W x 50”H, shipping weight 369 lbs.

 

P/N 901060V 275 Gallon Vertical Oval Tank, 29”W x 45”L x 64”H, shipping weight 328 lbs.

 

Bench Tanks:


Bench tanks are constructed from 12 gauge carbon steel with 3” channel bottom and 3” backsplash on three sides. Tank has a 1” drain, three 2” bung openings and comes standard with a reel mounting plate.

P/N 901062 165 Gallon Bench; 36”L x 33”W x 33”H (39” high overall), shipping weight 225 lbs.
P/N 901063 225 Gallon Bench; 48”L x 33”W x 33”H (39” high overall), shipping weight 255 lbs.
P/N 901064 280 Gallon Bench; 60”L x 33”W x 33”H (39” high overall), shipping weight 285 lbs.

 

Round ARB Tank:


Constructed from 12 gauge carbon steel with reel mounting plate, three 2” bung openings, lifting lug and a 1” drain. Legs are 2” x 2” x 1/8” angle iron. Finish is a light gray powder coat for improved durability.

P/N 901068 520 Gallon Round; 451ž2” Dia. x 74”L, shipping weight 455 lbs.
P/N 901076 300 Gallon Round; 37.75” Dia. x 62” L, shipping weight 250 lb.

 

Note: Contact Liquidynamics for availability of other tanks such as double wall or special sizes.

 

Storage Tank Accessories

Level Gauges:
Simple, direct mechanical action ensures reliability and high visibility. These gauges are available for tanks up to 12 ft. deep and can be used when mounting close to a tank wall.


Simple, direct mechanical action ensures reliability and high visibility. These gauges are available for tanks up to 12 ft. deep and can be used when mounting close to a tank wall.

P/N 901053
Tank Gauge for 275 Gallon Oval Tank

P/N 901057
Tank Gauge for 33” Deep Bench Tanks

P/N 901058
Tank Gauge for 451ž2” Deep 500 Gallon Round Tanks

P/N 901056
Tank Gauge for 60” Deep Square Tank and 275 Gallon Oval Vertical

P/N 901058-38
Tank Gauge for 38” Deep 300 Gallon Round Tank

 

Emergency Vent:
Emergency Vents (pressure relief only) are used on above ground tanks as a code requirement and helps prevent tanks from becoming over-pressurized and rupturing if exposed to fire. UL listed.


P/N 901946
3” Emergency Vent, 8 oz/sq in. opening pressure, with 59,900 CFH @ 2.5 PSI Venting Capacity, UL Listed.

P/N 901948
4” Emergency Vent, 8 oz./sq. in. opening pressure, with 119,750 CFH @ 2.5 PSI venting capacity. Sized to fit the 275 and 330 gal. oval tanks shown previously, UL Listed.

  

Fill Cap:
Loose-seal vented style cap with hinged cover. Fits 2” tank openings and may be locked with a padlock for security. Construction is cast iron with a black lacquer finish.


P/N 901054
2” NPTM Fill Cap

 

Low Level Cutoff Valves:
These simple float actuated cut-off valves prevent air from being introduced into fluid lines.


P/N 900274
1” NPTF Low Level Cutoff
P/N 900372
11ž2” NPTF Low Level Cutoff

 

P/N 900256
1/4” Quick Connect Air Coupler set
P/N 900283
3/8” Quick Connect Air Coupler set
P/N 900257
1/2” Quick Connect Air Coupler set