Model K500 Series

Spout may be rotated 90° and discharge tip may be rotated 270° (P/N 100351-RSA shown)

The K-500 Electronic Preset Meter may be used to dispense a preset quantity of oil, transmission fluid, hydraulic fluid, antifreeze and other compatible fluids. It is powered by four, field replaceable 1.5V AA batteries. Units of measurement are easily switched between pints, quarts, gallons and liters. The meter flow range is 1/4 to 8 GPM with a maximum operating pressure of 1,000 PSI and an accuracy of +/- 1/2%. Preset capability is from 0.1 to 99.9 units and may be programmed with up to 5 different frequently used preset quantities in addition to quick recall of the last used preset quantity. May also be used to show flow rate in gallons per minute. This preset meter is available with a wide selection of discharge spouts to fit most any application. Discharge spout may be positioned at five different angles and tip rotates 90°. The units of measure are shown on the LCD display and are easily changed from quarts to pints, gallons or liters.

Electronic Meters Preset — Model K500 Series

 

 

 

Model BP-100 Series

 

Standard Model	Advanced Model

Two versions of this pre-settable meter are available. The “Advanced” version features up to six programmable preset batch totals, ability to view the previous five batches dispensed, change units of measure and has flow rate capability.

The “Standard” version is greatly simplified, you enter the quantity you wish to dispense and pull the trigger.

Both meters are powered by four AAA alkaline batteries, which can be easily replaced in the field without loss of calibration or data. The 1/2” NPTF inlet includes a filter screen and swivel. These meters are suitable for use with engine oil, gear oil, transmission fluid, hydraulic fluid and antifreeze. The units of measure are shown on the LCD display and are easily changed from quarts to pints, gallons or liters.

Electronic Meters Preset — Model BP-100 Series