Valves
Gate Valves
Available in cast iron or aluminum construction. Excellent for dispensing viscous products such as heavy oils, flowable greases, varnish and molasses from drums by gravity draining.
P/N 900226
3/4” Iron Gate Valve
P/N 900227
2” Iron Gate Valve
P/N 900228
3/4” Aluminum Gate Valve
P/N 900229
2” Aluminum Gate Valve
1” Four-Way Reversing Valve
Simplifies plumbing and installation by eliminating the need for multiple valves typically found on waste oil systems. Allows one pump to be used to fill waste oil tank as well as to empty it, has four 1” NPTF ports. Aluminum body with brass spool. Rated to 200 PSI, 4.75” Dia. x 4.5” H.
P/N 900372
Overfill Warning Valve for Waste Oil Systems
Valve installs on 2” bung opening at top of waste oil tank, air supply is routed through valve before going to the pump. Valve will close off pump air supply when liquid level reaches 90% of tank capacity diverting air to provide an audible signal.
P/N 100555-AS
Isolation Valves:
Low Pressure Ball Valves, for use with air and water applications. Rated to 600 PSI maximum working pressure, bronze construction.
P/N 900366
1/4” NPTF
P/N 900367
3/8” NPTF
P/N 900285
1/2” NPTF
P/N 900287
3/4” NPTF
P/N 900288
1” NPTF
P/N 900324
1/2” NPTF w/bleed-off
Medium Pressure Ball Valves, for use with oil systems. Rated to 2,000 PSI maximum working pressure, carbon steel construction.
P/N 900286
1/2” NPTF
P/N 900299
3/4” NPTF
P/N 900371
1” NPTF
High Pressure Needle Valve, for use with grease systems. Rated to 10,000 PSI maximum working pressure, carbon steel construction.
P/N 900787
1/2” NPTF
P/N 900360
3/4” NPTF
