Electronic In-Line Meters and Pulsers
A broad range of in-line meters and pulsers are available for use with viscous fluids in the range of 2 to 2,000 cst. Typical fluids include engine oil, gear oil, transmission fluid, hydraulic fluid and other compatible fluids. Material of construction include; aluminum body, chrome plated steel shafts, acetal gears, neodynium magnet and Buna N Seals.
These meters use oval gear technology to provide excellent accuracy and repeatability with very little pressure drop. The LCD display provides batch and cumulative totals, which are powered by two, type 1N, alkaline batteries. Pulse data is generated by a reed switch, which provides a square wave, switch closure signal. Specific meter and pulser data is detailed in the specification chart on next page.
In-Line Meters w/Display:
P/N 100600
This compact and economical meter has a flow range of 0.25 to 8.0 GPM, 1/2” NPTF inlet and outlet, operating pressure rating of 1,000 PSI. Units of measure may be easily changed from pints, quarts, gallons or liters. Uses 2 ea. AAA 1.5V alkaline batteries, 3.0”W x 2.6”L x 2.15”H dim.
P/N 100385
Compact and economical turbine meter is ideal for use with windshield washer fluid, mixed antifreeze solutions and other water based fluids with low viscosities. Housing is constructed from a conductive polymer to allow static charge dissipation. Display features a rotatable, five digit, re-settable batch total with floating decimal and a six digit non re-settable cumulative total. Units of measure can be easily changed from quarts to gallons, pints or liters, meter is powered by two field replaceable AAA alkaline batteries. 1” NPTF inlet/outlet.
P/N 530020
Compact in-line meter has a flow range of 0.25 to 8.0 GPM, has 1/2” NPTF inlet and outlet, operating pressure of 1,500 PSI. Units of measure may be changed from pints, quarts, gallons or liters. Uses a lithium battery for approx. 5 year operating life, 4” Dia. x 2.75” H.
P/N 530021
High flow meter has a flow range from 0.80 to 15 GPM, with a pressure rating of 1,500 PSI which makes it ideal for use with high flow 5:1 pumps as well as the higher ratio 8:1 and 13:1 oil pumps. Functionally it is the same as P/N 530020 described above, but has 3/4” NPTF inlet and outlet threads, approx. 4” dia. x 3.3” high.
P/N 100395
Mechanical in-line meter uses oval gear technology to ensure low pressure drop and high precision and is intended for use with lubricating oils, hydraulic fluids, transmission fluid and 100% antifreeze. The die cast aluminum body is rated to 1,000 PSI working pressure with burst pressure of 3,000 PSI. Measured fluid is displayed via a 3 digit (plus fraction) re-settable batch total which reads in quarts, while the non re-settable totalizer has a 6 digit display reading in gallons. Inlet and outlet fittings are 1/2” NPTF, 3- 8 GPM.
