High Flow Fluid Control Valves
High Flow Control Valve and Meter
This meter and control valve combination is rated for flow rates of 1.6 to 15 GPM with a working pressure of 1,000 PSI and is ideal for use with high flow pneumatic ratio pumps such as P/N 21200 and 21300. The meter has a 5 digit re-settable batch total with floating decimal (will record up to 99,999 units) and a 6 digit non re-settable total. Units of measure can be easily changed from quarts to pints, gallons or liters. Valve inlet is 1” NPTF.
P/N 100390-HMH
High flow meter and valve combination with 12” discharge hose and high flow manual tip.
P/N 100390-RMH
High flow meter and valve combination with rigid discharge spout and manual high flow tip.
P/N 32107
These high flow control valves are an excellent accessory when maximum flow is desired, especially when Liquidynamics high flow pumps are being used. These control valves are rated to 1,000 PSI and up to 16 GPM are for use with motor oil, gear oil, hydraulic fluid, transmission fluid and antifreeze. They are supplied with a 1” NPTF swivel inlet and your choice of discharge fittings.
The range of High Flow Control Valves has been expanded to include rigid and flex discharge spouts and either automatic or manual tips.
P/N 32107-RA
Control Valve with Rigid Spout and Auto Tip
P/N 32107-RM
Control Valve with Rigid Spout and Manual Tip
P/N 32107-FA
Control Valve with Flex Spout and Auto Tip
P/N 32107-FM
Control Valve with Flex Spout and Manual Tip
P/N 900297
Lightweight polypropylene ball valve with 8” angled end flange for convenient transfer of liquids into tanks, drums, etc. Uses stainless steel nuts and bolts for a wide range of fluid compatibility. 1” NPTF inlet, 150 PSI max pressure.
