Grease Camlock Accessories
Camlock Stingers
These stingers are designed to be used with high volume grease transfer pumps P/N 11748 and 11848 for use with large Metal or Cardboard (collapsible) Grease Totes. Stingers will thread directly into the inlet of the High Volume Grease Transfer Pumps while the 3” Camlock connects to the bottom discharge of the grease tote.
P/N 900298M-EZ
Has 3” male fitting and 19” stinger for use with P/N 11848 (13:1 ratio, 100 lb/min) grease pumps and metal grease totes.
P/N 900298-EZ
Has 3” male fitting and 11” stinger for use with P/N 11848 (13:1 ratio, 100 lb/min) grease pump and collapsible cardboard grease totes.
P/N 900298M-A-EZ
Has 2” male fitting and 19” stinger for use with P/N 11748 (10:1 ratio, 70 lb/min) grease pumps and metal grease totes.
P/N 900298-A-EZ
Has a 2” male fitting and 11” stinger for use with P/N 11748 (10:1 ratio, 70 lb/min) grease pump and collapsible cardboard grease totes.
P/N 900298
3” Female Camlock Coupler with 3” NPTM threads used in conjunction with Bulk Grease Tote Camlock Pumps. Coupler mounts to Grease Tote Tank at side pocket or at bottom, depending on pump to be used.
P/N 900298-A
3” Female Camlock Coupler with 2” NPTM threads, otherwise same as P/N 900298.
