
Customer Service: 800-894-3572
Heavy Duty DC Pumps and Meters
![]() |
![]() |
![]() |
| Part Number | 560012 Model 1210C |
560062 Model FR4210D |
560045 Model FR410 |
| Features | 12 Volt DC Rotary Vane Pump | 12 Volt DC High Flow Pump | 12 Volt DC Diaphragm Pump |
| Warranty | Two Year | Two Year | Two Year |
| Construction pump housing | Cast Iron | Cast Iron | Polypropylene |
| Maximum flow rate with factory provided hose and nozzle | 15 GPM (57 LPM) | 20 GPM (76 LPM) | 13 GPM (49 LPM) (Dependent on viscosity) |
| Rotor composition | Iron | Iron | — |
| Explosion-proof motor with two sealed ball bearings | 1/4 HP | 1/4 HP | 1/4 HP |
| Amp draw from battery | 20 AMP | 22 AMP | 20 AMP |
| Thermal overload protection | Yes | Yes | Yes |
| Inlet | 1” NPT | 1” NPT | 1” NPT |
| Outlet | 3/4” NPT | 1” NPT | 1” NPT |
| Threaded tank adapter | 2” NPT | 2” NPT | 2” NPT |
| Internal bypass valve | Yes | Yes | Not required |
| Built-in strainer | Yes | Yes | No |
| Motor approvals | U/L, cU/L, CE | U/L, cU/L, CE | U/L, cU/L, CE |
| Spring driven diaphragm | — | — | Yes |
| Built-in check valve | Yes | Yes | Yes |
| Pump may be padlocked | Yes | Yes | No |
| Nozzle hanger | Yes | Yes | Yes |
| Machined carbon vanes | Yes | Yes | N/A |
| Duty cycle | 30 minute | 30 minute | 30 minute |
| Available Options | |||
| Model 800C/820 meter (gal or liters) | Yes (Series 800C) | — | Yes (Series 800C/820) |
| Series 900 Meter (gallons or liters) | — | No | — |
| Automatic Nozzle | Yes | Yes | — |
| Ball valve nozzle for chemicals | — | — | Yes |
| Santoprene diaphragm for increased chemical compatibility | — | — | Yes |
| 24 Volt 1/4 HP | Series FR2400C 10 Amp motor | Series FR4400 13 Amp motor | Series 200 10 Amp motor |
| Box Contents | |||
| Telescoping steel suction pipe 1” NPT | Yes | Yes | Yes |
| U/L hose with static wire | 3/4” x 12’ (3.7m) | 1” x 12’ (3.7m) | 1” x 12’ (3.7m) |
| Nozzle | 3/4” Manual | 1” Manual | 1” Manual |
| 18 (4.6m) 3-wire power cable | Yes | Yes | Yes |
| Applications | |||
| Compatible fluids (Not to be used with fluids that have a flash point of 100°F or less.) | Diesel Fuel, gasoline, kerosene, mineral spirits, Stoddard solvent and heptane | Diesel Fuel, gasoline, kerosene, mineral spirits, Stoddard solvent and heptane | Ethylene Glycol, diesel fuel grease, hydraulic oil, kerosene, motor oil, and water |









