DEF Bulk Transfer Skid Components
Heavy duty hose reel with one piece welded steel frame and durable powder coated finish ensures long trouble free operating life. Reels are available for use with 50’, 75’ or 100’ of 1-1/2” DEF hose. These reels have stainless steel swivels with EPDM seals and are available with 12 VDC, 115 VAC or air operated motor drives. All reels are supplied with an integral hand crank system as backup if power is unavailable, which also serves to provide an adjustable tension on the reel spool to prevent “freewheeling”.
P/N 195158A-50
Air motor driven hose reel with 1-1/2” x 50’ DEF hose
P/N 195158B-50
12 VDC motor driven hose reel with 1-1/2” x 50’ DEF hose
P/N 195158C-50
115 VAC motor driven hose reel with 1-1/2” x 50’ DEF hose
P/N 195158D-50
Hand crank hose reel with 1-1/2” x 50’ DEF hose
P/N 195159A-75
Air Motor driven hose reel with 1-1/2” x 75’ DEF hose
P/N 195159B-75
12 VDC motor driven hose reel with 1-1/2” x 75’ DEF hose
P/N 195159C-75
115 AC motor driven hose reel with 1-1/2” x 75’ DEF hose
P/N 195159D-75
Hand crank hose reel with 1-1/2” x 75’ DEF hose
P/N 195160A-100
Air motor Driven hose reel with 1-1/2” x 100’ DEF hose
P/N 195160B-100
12 VDC motor driven hose reel with 1-1/2” x 100’ DEF hose
P/N 195160C-100
115 VAC motor driven hose reel with 1-1/2” x 100’ DEF hose
P/N 195160D-100
Hand crank motor driven hose reel with 1-1/2” x 100 DEF hose
These stainless steel meters are weights and measures approved for use with DEF fluid. Meters are supplied standard with an air eliminator, 40 mesh inlet strainer and 5 digit reset-able mechanical register (8 digit non-reset totalizer). Inlet/outlet fittings are 1-1/2” NPTF. The meter can also be configured to include a ticket printer as well as pre-set capability.
P/N 195260A
40 GPM SS Meter, 1-1/2” w/mechanical register
P/N 195260B
40 GPM SS Meter, 1-1/2” w/mechanical register and printer
P/N 195261A
40 GPM SS Meter, 1-1/2” w/preset and mechanical register
P/N 195261B
40 GPM SS Meter, 1-1/2” w/preset, mechanical register and printer
P/N 195195
High flow stainless steel filter housing is rated to 105 GPM, uses 30” long, 1 micron cartridges (5 ea.) with 2” NPTM inlet/outlet.
P/N 195194-01
Replacement 1 micron filter cartridge for 195195 filter housing, 5 ea. required
P/N 195320
Honda 6.5 HP gasoline engine driven generator is rated for 115 VAC, 2800 watts, 23.3 amps and 12 VDC, 144 watt, 12 amp simultaneous AC/DC use. Unit is fully enclosed for quite operation (58 db @ rated load) and has 3 year warranty, 134 lb 25.8” L x 18.9” W x 22.4” H.
P/N 195250
Gasoline engine driven pump for bulk transfer of DEF fluid. This pump is constructed of polypropylene with EPDM static seal, uses a 10 pole magnetically driven impellor to eliminate shaft seal problems.
Pump is self priming after initial filling of the pump housing reservoir. It is rated up to 50 GPM with 25’ lift capability (water), with maximum discharge pressure of 90 PSI and is driven by a high quality 4 HP Honda engine. 1-1/2” NPT inlet and outlet.
P/N 195254
Same as 195250 above, except that it is powered by a 2 HP, 115 VAC motor.
